PM2.5 removal efficiency: >90%
Microbes removal efficiency: >90%
Noxious gas removal (formaldehyde, benzene, TVOC etc.)
Electrostatic air cleaners (sometimes known as electrostatic precipitators) are highly efficient filtration devices that use electrostatic attraction to remove fine particulate matter such as dust and cigarette smoke from the air. Electrostatic air cleaners ionize (or electrically charge) particles as incoming air is drawn over an electronic cell. The charged particles are then attracted to and trapped by a series of flat collector plates that are oppositely charged, with the particles literally “sticking” to the collection plates until they are manually removed.
An electrostatic filter is an indoor air purification equipment developed on the basis of the industrial electrostatic precipitator. It has been widely used on various indoor occasions, especially in ducted air conditioning and fresh air purification systems. It has become one of the most commonly used air purification equipment. Similar to filtering air purification equipment, electrostatic filters remove particles as small as 0.01 microns in the air.
The main features of electrostatic filters are high filtration efficiency, low air resistance, and low power consumption.
1 Sterilization and dust removal, efficient purification
Effectively capture dust particles as small as 0.01μm in the air and kill microorganisms attached to the dust particles. At the same time, the solid-state regulated power supply enables the equipment to maintain high efficiency and long-lasting filtration efficiency.
2 Low energy consumption, low operating costs
The resistance is about 20 Pa, which greatly reduces system energy consumption while ensuring indoor air quality. Low power consumption, the maximum power consumption of a single unit is 31W.
3 Green environmental protection, no secondary pollution
Bacterial dust is sintered and carbonized on the dust collection plate to avoid secondary contamination.
4 Durable and long service life
The lifespan of up to 10 years. Also, end-of-life materials are recycleble
The initial pre-filter of the BIOAIRO electrostatic filter first pre-filters the large particles of impurities and dust in the air, and then the air enters the high-voltage ionization section. This section inputs electrostatic high voltage to ionize and charge the particles in the air. At the same time, high-voltage static electricity will penetrate the cell structure of bacteria and viruses and completely kill the bacteria and viruses. The charged particles then enter the dust collection section. Different static voltages are input in this section so that the dust collecting plate is opposite to the charged particles so that the particles are adsorbed on the dust collecting plate, thereby achieving the effect of sterilization and dust removal.
Technology parameter (Standard)
Technology parameter (Compound)